Renovation of a Residential House, Chișinău

The “Interior Design at 20 EURO/M²” tariff includes the following services:
1. Site visit and measurements.
2. Design.
3. 3D visualization of the project.
4. Development of technical drawings.
5. Consultation in choosing finishing materials.
6. Continuous supervision throughout the renovation works. Site visits at each stage of work and checking project compliance.
7. Accompanying the Beneficiary during shopping and selection of finishing materials.

Notes!
1. The price of 20 EURO per square meter applies only if the renovation works are carried out by our company.
2. All services not included in the tariff plan but performed by the designer will be paid by the Beneficiary, according to the rates presented by the Contractor.

includes the following works and services:

Demolitions.

1. Removal of old layers of plaster, putty, and paint from ceilings and walls (in case of old apartments).
2. Demolition of walls in bathrooms, kitchen, and bedrooms.
3. Removal of construction waste (transport and workers up to 5 floors). The volume of garbage will not exceed one ZIL-type truck.

Drywall constructions and thick plaster.

1. Drywall installation on ceilings (including light coves) and toilet frame.
2. Plastering ceilings with guide profiles (maiac) or without, layer thickness up to 20 mm.

Thin plaster and finishes.

1. Preparation and priming of ceilings, walls, reveals (window/door), beams, columns.
2. Plastering walls with dry mix using guide profiles (maiac) or without, as needed.
3. Plastering of reveals (window/door), beams, columns with dry mix using guide profiles (maiac) or without, including installation of aluminum or plastic corner profiles.
4. Applying fiberglass mesh on ceilings, walls, reveals, beams, columns.
5. Applying fiberglass wallpaper on ceilings, walls, reveals, beams, columns.
6. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Vetonit, sanded.
7. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Sheetrock, sanded.
8. Painting ceilings, walls, reveals, beams, columns manually or mechanically. Painting includes applying one coat of primer and two coats of paint. Painting can be replaced with wallpaper, fully or partially.

Tiling and laminate flooring installation.

1. Waterproofing surfaces in contact with water in the bathroom.
2. Installing floor and wall tiles in the bathroom, and kitchen backsplash.
3. Miter cutting tile corners at 45 degrees.
4. Applying tile grout.
5. Installing laminate flooring/parquet/vinyl planks on floor and walls (if specified by the design project).
6. Installing plastic or MDF baseboard.

Logistics and other services.

1. Transporting machinery and tools necessary for carrying out the works described above.
2. Unloading and carrying construction materials up to a distance of 30 m or 2 floors in case there is no elevator.
3. Procuring consumables: metal and concrete cutting discs, brushes, rollers, gloves, safety goggles, drills, pencils, spatulas of various sizes, rulers of various lengths.

Notes.

1. Any modification or additional work to those discussed and agreed upon prior to signing the contract will be paid by the Beneficiary, according to the rates presented by the Contractor.
2. The cost estimate for performing the works described above will be drawn up free of charge by the Contractor.
3. If the Contractor takes care of purchasing the construction materials, this service will be offered free of charge.
4. The offer price does not include construction and finishing materials. The price includes only labor and specified services and will be calculated for each square meter of the renovated property.

includes the following works and services:

Demolitions.

1. Removal of old layers of plaster, putty, and paint from ceilings and walls (in case of old apartments).
2. Demolition of walls in bathrooms, kitchen, and bedrooms.
3. Removal of construction waste (transport and workers up to 5 floors). The volume of garbage will not exceed one ZIL-type truck.

Installation of electrical and multimedia system.

1. Cutting channels in concrete/brick/plaster.
2. Installation of tubes, cables, boxes, socket/switch, cutting holes for spotlights in ceilings.
3. Installation of the electrical panel and connecting circuit breakers.
4. Installation of the multimedia panel.
5. Patching channels with dry mix.
6. Installation of sockets and switches.
7. Installation of lighting fixtures.

Drywall constructions and thick plaster.

1. Drywall installation on ceilings (including light coves) and toilet frame.
2. Plastering ceilings with guide profiles (maiac) or without, layer thickness up to 20 mm.

Thin plaster and finishes.

1. Preparation and priming of ceilings, walls, reveals (window/door), beams, columns.
2. Plastering walls with dry mix using guide profiles (maiac) or without, as needed.
3. Plastering of window/door reveals, beams, columns with dry mix using guide profiles (maiac) or without, including installation of aluminum or plastic corner profiles.
4. Applying fiberglass mesh on ceilings, walls, reveals, beams, columns.
5. Applying fiberglass wallpaper on ceilings, walls, reveals, beams, columns.
6. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Vetonit, sanded.
7. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Sheetrock, sanded.
8. Painting ceilings, walls, reveals, beams, columns manually or mechanically. Painting includes applying one coat of primer and two coats of paint. Painting can be replaced with wallpaper, fully or partially.

Tiling and laminate flooring installation.

1. Waterproofing surfaces in contact with water in the bathroom.
2. Installing floor and wall tiles in the bathroom, and kitchen backsplash.
3. Miter cutting tile corners at 45 degrees.
4. Applying tile grout.
5. Installing laminate flooring/parquet/vinyl planks on floor and walls (if specified by the design project).
6. Installing plastic or MDF baseboard.

Logistics and other services.

1. Transporting machinery and tools necessary for carrying out the works described above.
2. Unloading and carrying construction materials up to a distance of 30 m or 2 floors in case there is no elevator.
3. Procuring consumables: metal and concrete cutting discs, brushes, rollers, gloves, safety goggles, drills, pencils, spatulas of various sizes, rulers of various lengths.

Notes.

1. Any modification or additional work to those discussed and agreed upon prior to signing the contract will be paid by the Beneficiary, according to the rates presented by the Contractor.
2. The cost estimate for performing the works described above will be drawn up free of charge by the Contractor.
3. If the Contractor takes care of purchasing the construction materials, this service will be offered free of charge.
4. The offer price does not include construction and finishing materials. The price includes only labor and specified services and will be calculated for each square meter of the renovated property.

includes the following works and services:

Demolitions.

1. Removal of old layers of plaster, putty, and paint from ceilings and walls (in case of old apartments).
2. Demolition of walls in bathrooms, kitchen, and bedrooms.
3. Removal of construction waste (transport and workers up to 5 floors). The volume of garbage will not exceed one ZIL-type truck.

Installation of electrical and multimedia system.

1. Cutting channels in concrete/brick/plaster.
2. Installation of tubes, cables, boxes, socket/switch, cutting holes for spotlights in ceilings.
3. Installation of the electrical panel and connecting circuit breakers.
4. Installation of the multimedia panel.
5. Patching channels with dry mix.
6. Installation of sockets and switches.
7. Installation of lighting fixtures.

Installation of water supply and sewerage system.

1. Dismantling of the old hot/cold water system.
2. Digging channels for pipes in floor and walls.
3. Installation of the new hot and cold water system.
4. Installation of the sewerage system.
5. Installation of the shower drain (trap).
6. Installation of the hidden toilet frame, connection to water and sewerage.
7. Testing the system under pressure.
8. Installation of plumbing fixtures and sanitary ware (toilet, sink, radiators, bathtub or shower).

Drywall constructions and thick plaster.

1. Drywall installation on ceilings (including light coves) and toilet frame.
2. Plastering ceilings with guide profiles (maiac) or without, layer thickness up to 20 mm.

Thin plaster and finishes.

1. Preparation and priming of ceilings, walls, reveals (window/door), beams, columns.
2. Plastering walls with dry mix using guide profiles (maiac) or without, as needed.
3. Plastering of window/door reveals, beams, columns with dry mix using guide profiles (maiac) or without, including installation of aluminum or plastic corner profiles.
4. Applying fiberglass mesh on ceilings, walls, reveals, beams, columns.
5. Applying fiberglass wallpaper on ceilings, walls, reveals, beams, columns.
6. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Vetonit, sanded.
7. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Sheetrock, sanded.
8. Painting ceilings, walls, reveals, beams, columns manually or mechanically. Painting includes applying one coat of primer and two coats of paint. Painting can be replaced with wallpaper, fully or partially.

Tiling and laminate flooring installation.

1. Waterproofing surfaces in contact with water in the bathroom.
2. Installing floor and wall tiles in the bathroom, and kitchen backsplash.
3. Miter cutting tile corners at 45 degrees.
4. Applying tile grout.
5. Installing laminate flooring/parquet/vinyl planks on floor and walls (if specified by the design project).
6. Installing plastic or MDF baseboard.

Logistics and other services.

1. Transporting machinery and tools necessary for carrying out the works described above.
2. Unloading and carrying construction materials up to a distance of 30 m or 2 floors in case there is no elevator.
3. Procuring consumables: metal and concrete cutting discs, brushes, rollers, gloves, safety goggles, drills, pencils, spatulas of various sizes, rulers of various lengths.

Notes.

1. Any modification or additional work to those discussed and agreed upon prior to signing the contract will be paid by the Beneficiary, according to the rates presented by the Contractor.
2. The cost estimate for performing the works described above will be drawn up free of charge by the Contractor.
3. If the Contractor takes care of purchasing the construction materials, this service will be offered free of charge.
4. The offer price does not include construction and finishing materials. The price includes only labor and specified services and will be calculated for each square meter of the renovated property.

includes the following works and services:

Demolitions.

1. Removal of old layers of plaster, putty, and paint from ceilings and walls (in case of old apartments).
2. Demolition of walls in bathrooms, kitchen, and bedrooms.
3. Removal of construction waste (transport and workers up to 5 floors). The volume of garbage will not exceed one ZIL-type truck.

Installation of electrical and multimedia system.

1. Cutting channels in concrete/brick/plaster.
2. Installation of tubes, cables, boxes, socket/switch, cutting holes for spotlights in ceilings.
3. Installation of the electrical panel and connecting circuit breakers.
4. Installation of the multimedia panel.
5. Patching channels with dry mix.
6. Installation of sockets and switches.
7. Installation of lighting fixtures.

Installation of water supply and sewerage system.

1. Dismantling of the old hot/cold water system.
2. Digging channels for pipes in floor and walls.
3. Installation of the new hot and cold water system.
4. Installation of the sewerage system.
5. Installation of the shower drain (trap).
6. Installation of the hidden toilet frame, connection to water and sewerage.
7. Testing the system under pressure.
8. Installation of plumbing fixtures and sanitary ware (toilet, sink, radiators, bathtub or shower).

Installation of the heating system.

1. Dismantling the old heating system.
2. Digging channels for pipes.
3. Installation of the new heating system via radiators or underfloor heating.
4. Installation of the boiler (gas or electric).
5. Installation of pipe manifolds.
6. Installation of radiators, in case of radiator heating system.
7. Installation of towel dryers.

Drywall constructions and thick plaster.

1. Drywall installation on ceilings (including light coves) and toilet frame.
2. Plastering ceilings with guide profiles (maiac) or without, layer thickness up to 20 mm.

Thin plaster and finishes.

1. Preparation and priming of ceilings, walls, reveals (window/door), beams, columns.
2. Plastering walls with dry mix using guide profiles (maiac) or without, as needed.
3. Plastering of window/door reveals, beams, columns with dry mix using guide profiles (maiac) or without, including installation of aluminum or plastic corner profiles.
4. Applying fiberglass mesh on ceilings, walls, reveals, beams, columns.
5. Applying fiberglass wallpaper on ceilings, walls, reveals, beams, columns.
6. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Vetonit, sanded.
7. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Sheetrock, sanded.
8. Painting ceilings, walls, reveals, beams, columns manually or mechanically. Painting includes applying one coat of primer and two coats of paint. Painting can be replaced with wallpaper, fully or partially.

Tiling and laminate flooring installation.

1. Waterproofing surfaces in contact with water in the bathroom.
2. Installing floor and wall tiles in the bathroom, and kitchen backsplash.
3. Miter cutting tile corners at 45 degrees.
4. Applying tile grout.
5. Installing laminate flooring/parquet/vinyl planks on floor and walls (if specified by the design project).
6. Installing plastic or MDF baseboard.

Logistics and other services.

1. Transporting machinery and tools necessary for carrying out the works described above.
2. Unloading and carrying construction materials up to a distance of 30 m or 2 floors in case there is no elevator.
3. Procuring consumables: metal and concrete cutting discs, brushes, rollers, gloves, safety goggles, drills, pencils, spatulas of various sizes, rulers of various lengths.

Notes.

1. Any modification or additional work to those discussed and agreed upon prior to signing the contract will be paid by the Beneficiary, according to the rates presented by the Contractor.
2. The cost estimate for performing the works described above will be drawn up free of charge by the Contractor.
3. If the Contractor takes care of purchasing the construction materials, this service will be offered free of charge.
4. The offer price does not include construction and finishing materials. The price includes only labor and specified services and will be calculated for each square meter of the renovated property.

includes the following works and services:

Demolitions.

1. Removal of old layers of plaster, putty, and paint from ceilings and walls (in case of old apartments).
2. Demolition of walls in bathrooms, kitchen, and bedrooms.
3. Removal of construction waste (transport and workers up to 5 floors). The volume of garbage will not exceed one ZIL-type truck.

Masonry and screed.

1. Building walls from autoclaved aerated concrete (AAC/BCA) blocks or plaster blocks, up to 50 sqm.
2. Pouring semi-dry screed, sanding.

Installation of electrical and multimedia system.

1. Cutting channels in concrete/brick/plaster.
2. Installation of tubes, cables, boxes, socket/switch, cutting holes for spotlights in ceilings.
3. Installation of the electrical panel and connecting circuit breakers.
4. Installation of the multimedia panel.
5. Patching channels with dry mix.
6. Installation of sockets and switches.
7. Installation of lighting fixtures.

Installation of water supply and sewerage system.

1. Dismantling of the old hot/cold water system.
2. Digging channels for pipes in floor and walls.
3. Installation of the new hot and cold water system.
4. Installation of the sewerage system.
5. Installation of the shower drain (trap).
6. Installation of the hidden toilet frame, connection to water and sewerage.
7. Testing the system under pressure.
8. Installation of plumbing fixtures and sanitary ware (toilet, sink, radiators, bathtub or shower).

Installation of the heating system.

1. Dismantling the old heating system.
2. Digging channels for pipes.
3. Installation of the new heating system via radiators or underfloor heating.
4. Installation of the boiler (gas or electric).
5. Installation of pipe manifolds.
6. Installation of radiators, in case of radiator heating system.
7. Installation of towel dryers.

Drywall constructions and thick plaster.

1. Drywall installation on ceilings (including light coves) and toilet frame.
2. Plastering ceilings with guide profiles (maiac) or without, layer thickness up to 20 mm.

Thin plaster and finishes.

1. Preparation and priming of ceilings, walls, reveals (window/door), beams, columns.
2. Plastering walls with dry mix using guide profiles (maiac) or without, as needed.
3. Plastering of window/door reveals, beams, columns with dry mix using guide profiles (maiac) or without, including installation of aluminum or plastic corner profiles.
4. Applying fiberglass mesh on ceilings, walls, reveals, beams, columns.
5. Applying fiberglass wallpaper on ceilings, walls, reveals, beams, columns.
6. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Vetonit, sanded.
7. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Sheetrock, sanded.
   Painting can be replaced with wallpaper, fully or partially.
8. Painting ceilings, walls, reveals, beams, columns manually or mechanically. Painting includes applying one coat of primer and two coats of paint.

Tiling and laminate flooring installation.

1. Waterproofing surfaces in contact with water in the bathroom.
2. Installing floor and wall tiles in the bathroom, and kitchen backsplash.
3. Miter cutting tile corners at 45 degrees.
4. Applying tile grout.
5. Installing laminate flooring/parquet/vinyl planks on floor and walls (if specified by the design project).
6. Installing plastic or MDF baseboard.

Logistics and other services.

1. Transporting machinery and tools necessary for carrying out the works described above.
2. Unloading and carrying construction materials up to a distance of 30 m or 2 floors in case there is no elevator.
3. Procuring consumables: metal and concrete cutting discs, brushes, rollers, gloves, safety goggles, drills, pencils, spatulas of various sizes, rulers of various lengths.

Notes.

1. Any modification or additional work to those discussed and agreed upon prior to signing the contract will be paid by the Beneficiary, according to the rates presented by the Contractor.
2. The cost estimate for performing the works described above will be drawn up free of charge by the Contractor.
3. If the Contractor takes care of purchasing the construction materials, this service will be offered free of charge.
4. The offer price does not include construction and finishing materials. The price includes only labor and specified services and will be calculated for each square meter of the renovated property.

includes the following works and services:

Demolitions.

1. Removal of old layers of plaster, putty, and paint from ceilings and walls (in case of old apartments).
2. Demolition of walls in bathrooms, kitchen, and bedrooms.
3. Removal of construction waste (transport and workers up to 5 floors). The volume of garbage will not exceed two ZIL-type trucks.

Masonry and screed.

1. Building walls from autoclaved aerated concrete (AAC/BCA) blocks or plaster blocks, up to 50 sqm.
2. Pouring semi-dry screed, sanding.

Installation of electrical and multimedia system.

1. Cutting channels in concrete/brick/plaster.
2. Installation of tubes, cables, boxes, socket/switch, cutting holes for spotlights in ceilings.
3. Installation of the electrical panel and connecting circuit breakers.
4. Installation of the multimedia panel.
5. Patching channels with dry mix.
6. Installation of sockets and switches.
7. Installation of lighting fixtures.

Installation of water supply and sewerage system.

1. Dismantling of the old hot/cold water system.
2. Digging channels for pipes in floor and walls.
3. Installation of the new hot and cold water system.
4. Installation of the sewerage system.
5. Installation of the shower drain (trap).
6. Installation of the hidden toilet frame, connection to water and sewerage.
7. Testing the system under pressure.
8. Installation of plumbing fixtures and sanitary ware (toilet, sink, radiators, bathtub or shower).

Installation of the heating system.

1. Dismantling the old heating system.
2. Digging channels for pipes.
3. Installation of the new heating system via radiators or underfloor heating.
4. Installation of the boiler (gas or electric).
5. Installation of pipe manifolds.
6. Installation of radiators, in case of radiator heating system.
7. Installation of towel dryers.

Drywall constructions and thick plaster.

1. Drywall installation on ceilings (including light coves) and toilet frame.
2. Plastering ceilings with guide profiles (maiac) or without, layer thickness up to 20 mm.

Thin plaster and finishes.

1. Preparation and priming of ceilings, walls, reveals (window/door), beams, columns.
2. Plastering walls with dry mix using guide profiles (maiac) or without, as needed.
3. Plastering of window/door reveals, beams, columns with dry mix using guide profiles (maiac) or without, including installation of aluminum or plastic corner profiles.
4. Applying fiberglass mesh on ceilings, walls, reveals, beams, columns.
5. Applying fiberglass wallpaper on ceilings, walls, reveals, beams, columns.
6. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Vetonit, sanded.
7. Plastering ceilings, walls, reveals, beams, columns with 2 layers of Sheetrock, sanded.
8. Painting ceilings, walls, reveals, beams, columns manually or mechanically. Painting includes applying one coat of primer and two coats of paint. Painting can be replaced with wallpaper, fully or partially.
9. Applying decorative plaster and paint to ceilings and walls. The volume included in the tariff will not exceed 50% of the total volume of finished surfaces.

Tiling and laminate flooring installation.

1. Waterproofing surfaces in contact with water in the bathroom.
2. Installing floor and wall tiles in the bathroom, and kitchen backsplash.
3. Miter cutting tile corners at 45 degrees.
4. Applying tile grout.
5. Installing laminate flooring/parquet/vinyl planks on floor and walls (if specified by the design project).
6. Installing plastic or MDF baseboard.

Logistics and other services.

1. Transporting machinery and tools necessary for carrying out the works described above.
2. Unloading and carrying construction materials up to a distance of 30 m or 2 floors in case there is no elevator.
3. Procuring consumables: metal and concrete cutting discs, brushes, rollers, gloves, safety goggles, drills, pencils, spatulas of various sizes, rulers of various lengths.

Notes.

1. Any modification or additional work to those discussed and agreed upon prior to signing the contract will be paid by the Beneficiary, according to the rates presented by the Contractor.
2. The cost estimate for performing the works described above will be drawn up free of charge by the Contractor.
3. If the Contractor takes care of purchasing the construction materials, this service will be offered free of charge.
4. The offer price does not include construction and finishing materials. The price includes only labor and specified services and will be calculated for each square meter of the renovated property.

Applies to constructions with an area of 250-600 m² and includes the following services:

1. Site visit and measurements.

2. Development of project drafts (concept).

3. Development of the execution project with the following compartments:

a) Architectural compartment

b) General plan

c) Plan for the organization of construction works

d) Color scheme

e) Development of the task sheet / specifications (if necessary)

f) Project expertise

g) Structural compartment

1. Project approval and verification, preparing documents for submitting for the building permit.

2. Filling in the object’s technical book.

Notes!

1. The technical book will be purchased by the Beneficiary.
2. Filling in the technical book requires the Beneficiary to contract a technical supervisor and a site manager. At the request of the Beneficiary, these services can be offered by our company.
3. The design author supervision and the designer’s site visits will be paid by the Beneficiary.
4. For wooden or metal constructions, an additional fee of 25% will be charged.

Applies to constructions with an area greater than 600 m² and includes the following services:

1. Site visit and measurements.

2. Development of project drafts (concept).

3. Development of the execution project with the following compartments:

a) Architectural compartment

b) General plan

c) Plan for the organization of construction works

d) Color scheme

e) Development of the task sheet / specifications (if necessary)

f) Project expertise

g) Structural compartment

1. Project approval and verification, preparing documents for submitting for the building permit.

2. Filling in the object’s technical book.

Notes!

6. The technical book will be purchased by the Beneficiary.
7. Filling in the technical book requires the Beneficiary to contract a technical supervisor and a site manager. At the request of the Beneficiary, these services can be offered by our company.
8. The design author supervision and the designer’s site visits will be paid by the Beneficiary.
9. For wooden or metal constructions, an additional fee of 25% will be charged.

Applies to constructions with an area from 150 m² up to 250 m² and includes the following services:

1. Site visit and measurements.

2. Development of project drafts (concept).

3. Development of the execution project with the following compartments:

a) Architectural compartment

b) General plan

c) Plan for the organization of construction works

d) Color scheme

e) Development of the task sheet / specifications (if necessary)

f) Project expertise

g) Structural compartment

1. Project approval and verification, preparing documents for submitting for the building permit.

2. Filling in the object’s technical book.

Notes!

1. The technical book will be purchased by the Beneficiary.
2. Filling in the technical book requires the Beneficiary to contract a technical supervisor and a site manager. At the request of the Beneficiary, these services can be offered by our company.
3. The design author supervision and the designer’s site visits will be paid by the Beneficiary.

1. For wooden or metal constructions, an additional fee of 25% will be charged.

Applies to constructions with an area up to 150 m² and includes the following services:

1. Site visit and measurements.

2. Development of project drafts (concept).

3. Development of the execution project with the following compartments:

a) Architectural compartment

b) General plan

c) Plan for the organization of construction works

d) Color scheme

e) Development of the task sheet / specifications (if necessary)

f) Project expertise

g) Structural compartment

1. Project approval and verification, preparing documents for submitting for the building permit.

2. Filling in the object’s technical book.

Notes!

1. The technical book will be purchased by the Beneficiary.
2. Filling in the technical book requires the Beneficiary to contract a technical supervisor and a site manager. At the request of the Beneficiary, these services can be offered by our company.
3. The design author supervision and the designer’s site visits will be paid by the Beneficiary.
4. For wooden or metal constructions, an additional fee of 25% will be charged.